Dogtra eF-3000 - Manual (Page 14)

27
INSTALLATION
Fence Wire
The fence wire must make a continuous loop
around your property for your system to operate.
The signal is delivered from the terminal of the
transmitter, through the fence wire, back to the other
terminal on the transmitter. When this is
accomplished, the wire continuity light will emit a
constant red indicator.
INSTALLATION
26
3. Next, activate the collar receiver with the magnetic
switch tool by touching it to the red dot on the
receiver. The LED light will blink once every two
seconds showing that it is on.
4. Hold the receiver in your hand with the contact
points facing up. Place the test lamp over the
points and approach the test loop.
5. Watch for the test light to come on and/or the unit
will emit the warning vibration if the unit is in this
mode at the wall mount transmitter. Be careful not
to touch the contact points as the unit will emit
stimulation when activated.
TESTING