Dogtra 2000B Series - Manual (Page 8)

13
To turn the beeper unit off, press the MODE
button a third time. The unit will emit three rapid
beeps. The beeper unit is now off.
To turn the collar on, press the on/off button
on the collar and hold it down until the red
indicator light comes on (about 1 second). The
on/off switch has a built-in delay so that the
collar can not be turned off if accidentally
bumped.
OPERATING
12
OPERATING
running
RUN/POINT
POINT
Action of
a dog
MODE
every 7.5 seconds every 2 seconds
silence every 2 seconds
on point
INTENSITY SELECTION DIAL
The intensity selection dial is located on the
top of the transmitter.
Number (1) one is the lowest level and number
(100) one hundred is the highest level.
In the fully counter clockwise position- zero
setting- no electrical stimulation occurs even when
the constant button or the nick button is pressed
(a safety feature).
Moving the dial from the zero setting in a
clockwise manner will increase the electrical
stimulation.
Conversely, moving the dial counter-clockwise
will lower the stimulation level.
NOTE : Intensity can be increased or reduced
during actual stimulation.