Dogtra EDGE User Manual

Page 15

To replace the battery in the receiver/collar,

1. Begin with the receiver/collar turned off.
2. Remove the strap and unscrew th

e Phillips

head screws on the four

corners of the receiver/collar.

8QVFUHZWKHVFUHZVZLWKD¿UPJULSWDNLQJH[WUDFDXWLRQWRQRWVWULS

the screws.

5HPRYHWKHIURQWFDVH:KLOHKROGLQJWKHEDWWHU\ZLUHGHWDFKWKH

wire from the battery connector plug.

4. Holding the battery wire of the new battery, plug the wire in to the

battery connector plug.

&KHFNWKDWWKHEDWWHU\FRQQHFWRUZLUHLV¿UPO\LQVHUWHGLQWRWKHSOXJ

The battery wires must be inside the battery compartment.

* Caution - Do not detach the wire
by pulling from the battery.

* Caution - The battery wires must
run neatly along the top left side in
to the battery compartment.

* Caution - The orange rubber
JDVNHWLVLPSRUWDQWIRUWKHXQLW
to be waterproof and must be
properly seated in place.