Dogtra EDGE User Manual

Page 11

To change the program setting, follow the steps below.

4. The display on the LCD screen will now show the icon for the

rheostat/volume or the selector/step. Repeat the steps from the
EHJLQQLQJWRVZLWFKEDFNDQGIRUWKIURPWKHUKHRVWDWYROXPHDQGWKH
selector/step style of intensity control.

,FRQIRUWKHUKHRVWDWYROXPH,FRQIRUWKHVHOHFWRUVWHS

6HWWKHWUDQVPLWWHU¶VLQWHQVLW\

dial to 0.

6HWWKHPRGHGLDOWR³3´

6LPXOWDQHRXVO\KROGGRZQWKH

EODFNEXWWRQRQWKHIURQWRIWKH
transmitter, along with the on/off
EOXHEXWWRQRQWKHEDFNRIWKH
transmitter.

9. What the LCD icons mean

The icons on the LCD screen on the transmitter are listed below.

10. Changing the receiver/collar location light color

The EDGE receiver/collar location light can be set to any of the 4 colors
offered.
To change the receiver/collar location light to white, red, green, or blue,
follow the instructions below,
6WDUWZLWKWKHUHFHLYHUFROODUWXUQHGRII
2. Hold down the on/off button on the receiver/collar for 10 seconds.
* Attention: The on/off button must be pressed for a full 10 seconds.
5HOHDVHWKHRQRIIEXWWRQDIWHUWKHZKLWHORFDWLRQOLJKWÀDVKHVUDSLGO\

7KHZKLWHORFDWLRQOLJKWZLOOVWDUWÀDVKLQJDIWHUWKHVLQJOHJUHHQVPDOO
/('LQGLFDWRUFRGHVHWWLQJOLJKW¿QLVKHVEOLQNLQJ

4. Press the on/off button once to set the desired color.
* The location light colors will rotate in the order of white, red, green,

and blue for two full rotations.

* The location light color will reset to the corresponding color when re-

coded to another button.

1LFN

Constant

Pager

Light

Rheostat/volume intensity control

6HOHFWRUVWHSLQWHQVLW\FRQWURO

Battery life indicator

Push

simultaneously