Dogtra EDGE User Manual

Page 14

15. How to change the battery

The Dogtra EDGE batteries are user replaceable.
To replace the battery in the transmitter, follow the instructions below.
1. Begin with the transmitter turned off.
8QVFUHZWKHWZR3KLOOLSVKHDGVFUHZVDWWDFKHGWRWKHEDFNRIWKHEHOW

clip and remove the belt clip. – (1)

8QVFUHZWKHVFUHZVZLWKD¿UPJULSWDNLQJH[WUDFDXWLRQWRQRWVWULS

the screws.

8QVFUHZWKHWZRVFUHZVRQWKHEDFNRIWKHWUDQVPLWWHU±
8QVFUHZWKHVFUHZVZLWKD¿UPJULSWDNLQJH[WUDFDXWLRQWRQRWVWULS

the screws.

4. Holding the battery wire, detach the wire from the battery connector

plug(see picture).

5. Holding the battery wire of the new battery, plug the wire in to the

battery connector plug.

$WWHQWLRQ7KHEDWWHU\ZLUHSOXJLQLVLQGHQWHGWR¿WLQRQHZD\WRWKH

connector.

&KHFNWKDWWKHEDWWHU\FRQQHFWRUZLUHLV¿UPO\LQVHUWHGLQWRWKHSOXJ

7KHEDWWHU\ZLUHVPXVWEHLQVLGHWKHEDWWHU\FRPSDUWPHQWWXFNHG
neatly along the right side of the battery.

(1)

(2)

)DVWHQWKHEDWWHU\FRYHUDQGWKHEHOWFOLSEDFNRQWKHWUDQVPLWWHUZLWK
the four screws.

* Caution - Do not detach the wire
by pulling from the battery.

* Caution - The battery wires must
be inside the battery compartment
WXFNHGQHDWO\DORQJWKHULJKWVLGH
of the battery.

* Caution - The orange rubber
JDVNHWLVLPSRUWDQWIRUWKHXQLW
to be waterproof and must be
properly seated in place.