Dogtra 280 Series - Manual (Page 9)

14
BUTTON FUNCTIONS
“Constant” Button
The “Constant” button is located on the bottom
left. Pressing the “Constant” button gives
continuous stimulation as long as the button is
pushed, for up to 12 seconds. If the button is not
released after 12 seconds, the stimulation will
automatically turn off as a safety feature. The
collar will be ready to be reactivated once the
button has been released.
“Pager” Button
The “Pager” button is located on the face of the
transmitter. Pressing it will give non-stimulating
vibration as long as the button is depressed, for
up to 12 seconds.
Transmitter Power ON/OFF
The button on the right side of the transmitter is
the “ON/OFF” button that activates the
transmitter and LCD screen only.
To turn the transmitter on, press the “ON/OFF”
button on the right side until the LCD screen
illuminates.
To turn the transmitter off, press the “ON/OFF”
button on the right side of the transmitter. When
the LCD screen displays “OFF” release the
button.
“Nick” & “Constant” Toggle Switch
Located on the face of the transmitter is a
toggle switch. The toggle switch has
a setting for “Nick” and another for
Constant . The color-coordinated buttons
(orange for the orange receiver/collar and gray
for the black receiver/collar) will implement
the desired stimulation based on the toggle
switch setting.
15
BUTTON FUNCTIONS
The two-dog unit
has five buttons and a toggle switch on the
transmitter.
Two on the face of the transmitter, two on the
left side, and one on the right side.
(2-dog)
Nick/Constant
Toggle Switch
1 st -dog
Pager
(Gray Button)
2 nd -dog
Pager
(Orange Button)
ON/OFF
Switch
1 st -dog
Nick & Constant
(Gray Button)
2 nd -dog
Nick & Constant
(Orange Button)