Dogtra 280 Series - Manual (Page 8)

12
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Battery Charging Receptacle &
Rubber Plug
Located on the backside of the transmitter, the
charging receptacle is covered by a rubber plug.
Insert one end of the battery charging cable into
the receptacle to charge the battery (See Battery
Charging Procedure on page 28).
After charging is completed, close the receptacle
with its rubber plug to make sure dirt or water
does not get inside.
13
BUTTON FUNCTIONS
The transmitter for the
single dog unit has four buttons (one on the
face of the transmitter, two on the left side and
one on the right side).
BUTTON FUNCTIONS
Nick
Pager
ON/OFF
Switch
Constant
(1-dog)
“Nick” Button
The “Nick” button is located on the top left. It is
imprinted with the letter “N” for an easy, clear
selection. When the “Nick” button is pushed the
receiver emits a single pulse of electrical
stimulation.