Dogtra 280 Series - Manual (Page 11)

18
DESCRIPTION OF COLLAR / RECEIVER PARTS
Receiver ON/OFF Magnetic Red Dot
To activate the receiver/collar, place the red dot
on the back of the transmitter to the red dot on
the collar/receiver. Hold the two red dots
together for a moment until the LED light on the
receiver/collar comes on.
To deactivate the unit, repeat the same
procedure holding the two red dots together
momentarily. The LED light will turn red for a
brief moment indicating that the collar/receiver
is now shut off.
Receiver Indicator Light (LED window)
Located on the front of the receiver/collar, the
indicator light comes on and blinks once every 2
seconds after the collar has been turned on. The
color of the LED indicates the battery life of the
receiver.
(Green = full charge, Amber = medium charge,
Red = needs charge)
When the “Constant” button on the transmitter
is pushed, the collar indicator light will glow
steadily (either green, amber, or red based on
the remaining battery life), as long as you hold
the button down, for up to 12 seconds.
When the “Nick” button is pushed, the light
comes on for a fraction of a second.
19
DESCRIPTION OF COLLAR / RECEIVER PARTS