Dogtra 280 Series User Manual

Page 16

Battery Charging Procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on
page 27.

2. Plug the charger into a 120-volt wall outlet

or, if using the accessory field charger, plug
into a cigarette lighter. (Use a 230-volt
European charger for Europe.) When
properly plugged in, all indicator lights
should glow red.
The receiver automatically turns off when
you insert the charging cable into the battery-
charging receptacle on the receiver.

CHARGING THE BATTERIES

Recharge the unit if :

The LED indicator light on the collar
receiver is emitting a red color.

If the 3 bar indicator on the transmitter LCD

shows just 1 bar.
The indicator light on the transmitter or
receiver will not come on.
The transmitter or receiver dose not stay on
when one of the stimulation or pager buttons
is pushed.

CHARGING THE BATTERIES

3. After charging, cover the battery charging

receptacles with the rubber plugs on the
transmitter and receiver.

4. The battery is fully charged with a 10-hour

charge. The lights will stay red during the
charging process. They DO NOT turn green
when fully charged. Charging the batteries
for more than 10 hours at one time will not
extend the battery life.