Dako Hybridizer - Manual (Page 15)

Dako Hybridizer | Handbook 15
If the ambient temperature changes after a process is completed, but before the user removes the slides
and causes the instrument process set temperature to change beyond the +/- 1
°C specification for more
than 2 minutes a message will appear to inform the user that the ambient temperature is “high”. A
constant beep will sound. The counter will continue to count. The present temperature will be displayed.
Hitting the “Stop” button will allow user to abort the process. A new screen will be displayed asking user
if they are sure they want to abort.
Hyb only:
“Ambient Temp High!” flashes
alternately on “PROCESS COMPLETE” line.
Abort Screen Message:
If 40 programs have been created or edited the software will blank out the “Create” mode on the main
menu screen. This will only allow users to edit existing programs.
PGM – Name
PROCESS COMPLETE Total
Hyb Time --:-- End
PGM/Main Menu
ABORTING!!
Are You Sure?
No
Yes – Main Menu
Run a PGM
Edit a PGM
Present Temp: --
°C