Dell Inspiron 1545 - Manual (Page 27)

5. Disconnect the cables from the connectors on either side of the inverter board.
6. Remove the display panel cable (see Removing the Display Panel Cable ).
7. Remove the six screws (three on either side) that secure the display panel brackets to the display panel.
Replacing the Display Panel
1. Attach the display panel brackets to the display panel by replacing the six screws (three on either side).
2. Replace the display panel cable (see Replacing the Display Panel Cable ).
3. Connect the cables to the connectors on either side of the inverter board.
4. Align the display panel and the inverter board with the display frame.
5. Replace the two screws securing the display panel.
6. Replace the two screws securing the inverter board.
7. Replace the display bezel (see Replacing the Display Bezel ).
8. Replace the display assembly (see Replacing the Display Assembly ).
Display Panel Cable
1 display panel screws (2) 2 inverter board screws (2)
3 display panel 4 inverter board
1 screws (6) 2 display panel brackets (2)