BMW 2007 bmw 328i - Manual (Page 84)

E
ve
ryth
ing un
de
r co
nt
rol
82
6. Press button 2.
The system stores the new date.
Via iDrive
iDrive, for operating principle refer to page 16 .
1. Open the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
4. Select "Date" and press the controller.
5. Select "Set date" and press the controller.
The first date display setting is selected.
6. Turn the controller to make the adjustment.
7. Press the controller to apply the setting.
The next setting is highlighted.
8. Make the remaining adjustments. After the
last adjustment, the date is stored.
Setting the date format
1. Open the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
4. Turn the controller until "Time / Date" is
selected and press the controller.
5. Select "Date format" and press the control-
ler.
6. Select the desired format and press the
controller.
Check Control
The concept
The Check Control monitors vehicle functions
and alerts you to any malfunctions in the sys-
tems monitored. Such a Check Control mes-
sage includes indicator and warning lamps in
the instrument cluster and, in some circum-
stances, an acoustic signal as well as text mes-
sages at the bottom of the Control Display.
Indicator and warning lamps
Indicator and warning lamps can light up in both
the indicator area
1 and the display 2 in various
combinations and colors.
indicates that Check Control messages have
been stored. You can view the Check Control
messages whenever it is convenient for you.
Online Edition for Part no. 01 41 0 012 928 - © 08/06 BMW AG