Notes, Inserting/removing snap-in adapter, Telephoning – BMW 2007 bmw 328i User Manual
Page 190
Telephoning
188
Selecting an entry
The connection to the phone number of the
selected entry is established.
Redialing
The
{Redial} command calls up "Redial".
Notes
The commands in English were available
as of this printing. Other languages are
currently in preparation. To operate the mobile
phone via the voice command system, refer to
page
.
<
Important for voice commands
For voice commands, bear in mind the follow-
ing:
>
Pronounce the commands smoothly and at
normal volume, avoiding excessive empha-
ses and pauses.
>
Keep the doors, windows and glass sunroof
closed to prevent interference from outside
noise.
>
Avoid ambient noise in the vehicle while
speaking.
Inserting/removing snap-in
adapter
1.
Press area
1 around the button and take off
the cover.
2.
Insert the snap-in adapter in the front and
press it downward until it engages.
To remove the snap-in adapter:
Press area
1 around the button.
Inserting mobile phone
1.
If applicable, remove the protective cap
from the mobile phone's antenna connector
so that the mobile phone can engage in the
snap-in adapter.
2.
With its buttons facing upward, slide the
mobile phone up towards the electrical con-
1.
{Dial name}.
The dialog for selecting an entry is
opened.
2.
Say the name when prompted.
3.
Confirm the prompt with
{Yes}.
Online Edition for Part no. 01 41 0 012 928 - © 08/06 BMW AG