Yealink EXP40 - Manual (Page 21)

Configuration
13
5. Select the desired line to apply this key from the pull-down list of Line.
6. Click Confirm to accept the change.
Group pickup allows you to pick up incoming calls within a pre-defined group of phone
numbers.
You can configure a DSS key as the group pickup key. When any number within the
group receives an incoming call, you can press the group pickup key to pick up the
incoming call. If the numbers within the group receive multiple incoming calls, the first
incoming call will be picked up.
To configure a DSS key as the group pickup key:
1. Click on DSSKey->Ext Key.
2. In the desired DSS key field, select Group Pickup from the pull-down list of Type.
3. Enter the group call pickup code in the Value field.
4. Enter the desired value in the Label field or leave it blank.
If you leave this field blank, the LCD screen will display the default label “Group
Pick Up”.