Yealink EXP40 - Manual (Page 16)

Yealink EXP40 User Guide
8
If you leave this field blank, the LCD screen will display the default label “Forward”.
5. Click Confirm to accept the change.
You can configure a DSS key as the transfer key. Then you can perform a Blind,
Semi-Attend or Attended Transfer by pressing the transfer key during a call.
To configure a DSS key as the transfer key:
1. Click on DSSKey->Ext Key.
2. In the desired DSS key field, select Transfer from the pull-down list of Type.
3. Enter the phone number you want to transfer the call to in the Value field or leave it
blank.
4. Enter the desired value in the Label field or leave it blank.