Conference – Yealink EXP40 User Manual
Page 14
Yealink EXP40 User Guide
6
Note
You can configure a DSS key as the conference key. When you are in a call, you can
press the conference key to invite a third party to join a conference.
To configure a DSS key as the conference key:
1. Click on DSSKey->Ext Key.
2. In the desired DSS key field, select Conference from the pull-down list of Type.
3. Enter the phone number or extension of the destination party in the Value field or
leave it blank.
If a phone number is configured, you can dial out the number by pressing the
conference key when the phone is idle or during a call.
4. Enter the desired value in the Label field or leave it blank.
Quick access features like intercom and voice mail should be configured on your SIP
server in advance to make sure they will work on your phone. Contact your system
administrator for more information.
If more than one expansion module is connected, select the desired expansion module
from the pull-down list of Expansion Key.
Feature codes may vary between different servers.