Canon FB620P - Manual (Page 61)

61
Cause 2: Scanner not detected because the power cord plug is not correctly
connected to the scanner
Solution: Reconnect the power cord to the scanner ( See p. 26 )
Cause 3: Scanner not detected because a parallel cable is not securely
fastened to the scanner or computer
Solution: Securely fasten the parallel cables ( See p. 23 )
CanoCraft CS-P will not start
Cause 1: Insufficient memory (RAM) available to run CanoCraft CS-P
Solution: Close other programs and run CanoCraft CS-P
Cause 2: CanoCraft CS-P Copy running
Solution: CanoCraft CS-P cannot run at the same time as CanoCraft CS-P
Copy. Close CanoCraft CS-P Copy (See CanoCraft CS-P Users Guide)
Cause 3: CanoCraft CS-P already running within another application as a
TWAIN driver
Solution: Close the version of CanoCraft CS-P running within the other
application and restart (See CanoCraft CS-P Users Guide)
Cause 4: Printing in progress
Solution: CanoCraft CS-P cannot be started while printing is in progress.
Start CanoCraft CS-P after printing finishes