Carlo Gavazzi PQT-90 - Manual (Page 45)

Last functions
88
PQTSoft Network
87 86
Last functions
84
PQTSoft Network
[1] Enter the name of the contact
[2] Enter the telephone number referred to the contact.
[3] Enter the name of the folder where all the files of the data
downloaded by PQT will be saved.
[4] Enter the number of PQTs located on the network.
[5] If selected, PQTSoft will dial this contact when the operating
mode “automatic data download” will be enabled.
[1] Select the location chosen in the dialling properties.
1
2
3 4
5
It is possible to enable or disable the
contacts to be dialled by PQTSoft
also directly on the list clicking the
“Selection” column on the line corre-
sponding to the contact to be
enabled/disabled. A drop-down
menu will appear: double click “On”
to enable or “Off” to disable.
❑
Dialling properties
[1] List the currently selected locations. To select a new
location click “New”.
[2] On the left box select the country from the list of the
drop-down menu, on the right box type the area code (e.g.
0039 for Italy).
[3] In the first box type the number/s to be dialled to access
an external line for local calls (e.g. “0” or “9”). In the second
box type the number/s to be dialled to access an external
line for trunk calls (e.g. “8”). If no number is needed to
access an external line, leave the boxes empty.
1
1
1
2
3
4
5