General instructions, Product description, Material required but not supplied – Bio-Rad DEAE Affi-Gel Blue Gel User Manual
Page 3
Material Required but not Supplied
Pre-wash buffer
0.1 M acetic acid, pH 3, 1.4 M NaCl,
40% isopropanol
Running buffer
see Table 2
Regeneration buffer
2 M guanidine HCl in application
buffer, or 1.5 M NaSCN
Buchner funnel
Chromatography column
General Instructions
1.
Prepare the appropriate buffer using the information
given in Table 1. Accurate buffer preparation is
essential for optimum IgG recovery. See Optimizing
the Separation Conditions.
Table 1. Buffers for Purification of IgG from Serum on DEAE Affi-
Gel Blue gel
Species
Application Buffer
Rabbit
20 mM Tris-HCl, pH 8.0, 25 mM NaCl,
0.02% NaN
3
Sheep
as for rabbit
Goat
as for rabbit
Human*
20 mM K
2
HPO
4
, pH 8.0, 0.02% NaN
3
Mouse
20 mM Tris-HCl, pH 7.2, 25-50 mM NaCl
These buffers are recommended starting points. Minor changes may be
needed. See Optimizing the Separation Conditions.
*KH
2
PO
4
is used to prepare this buffer. The pH is adjusted with KOH.
3
superior method of obtaining serum fractions
uncontaminated by albumin.
Product Description
Matrix
Bio Gel A-5m agarose gel
Particle size
150-300 µm (50-100 mesh)
Shipping medium
0.01M Tris, pH 8, 0.15 M NaCl,
0.04% NaN
3
Functional Groups
Cibacron blue and diethylaminoethyl
Typical flow rate*
15-25 cm/hr
Pressure limit
15 psi
Capacity**
Serum
0.2-1 ml of serum/ml of gel
Recovery of IgG
>55%
Recovery of Albumin
>90%
Removal of protease
100%
Stability
pH
2-11
Organic solvents
alcohols
Temperature
not autoclavable
Storage
1 year at 4 °C, in 0.02% NaN
3
or
other preservative
*Flow rate determined using a 1.5 x 20 cm column, and a hydrostatic
pressure of 1:1.
**The capacity for rabbit serum and human serum is lot to lot dependent.
It is determined on every lot, and provided on the label.
2
4006049A 8/28/98 04:11 PM Page 2