Bio-Rad ZOE™ Fluorescent Cell Imager - Manual (Page 28)

20 | ZOE Fluorescent Cell Imager Instruction Manual 20 |
Cleaning the Objective Lens
1. Raise the objective lens to its highest focus position.
2. Unplug the instrument.
3. Put a drop of recommended lens cleaner on lens tissues or cotton swab and gently wipe
the objective lens clean and dry.
Recommended Lens Cleaning Fluid
n
Lens Cleaner, Zeiss, #490133
n
Sparkle Optical Lens Cleaner, AmScope, #50104
Recommended Lens tissue
n
Commercial Grade Lens Tissue, Edmund Scientific Co., #52105
n
Cotton-Tipped Swab Applicators, Edmund Scientific Co., #56926
Warning! Do not put fingers into the stage hole or attempt to clean the objective lens while
moving the motorized stage.
Battery
The ZOE Fluorescent Cell Imager uses a 3 V lithium coin cell battery with a 10-year expected
lifetime to maintain the clock setting. If the date on the instrument changes without user input,
it may be an indication that the battery is getting weak. Should this occur, contact Bio-Rad
technical support for assistance with battery replacement.
Warning! Do not attempt to change the battery. Contact the Bio-Rad technical support team.
For the State of California (U.S.) only.
Perchlorate material — special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate for more information.
Perchlorate material: lithium battery contains perchlorate.