Bio-Rad UView™ 6x Loading Dye plus Mini Transilluminator - Manual (Page 8)

UView Mini Transilluminator 7
UV shield held in place by the magnets. Shield is also positioned to depress the
UV safety switch.
UV Safety Mechanism
Only when the UV shield is attached on the housing above the
glass filter in such a way as to press down the UV safety switch
can the power switch on the back side be turned on.
Bulb Replacement
Attention: If substances known to be dangerous to health are
used on the transilluminator, clean and treat the instrument for
proper decontamination. Please use protective gloves when
handling and opening the device.
To ensure optimal function, replace the bulb after every 500 hours
of use.
1. Decontaminate the instrument per the instructions given in the
section “GENERAL PRECAUTIONS.”
2. Remove the power cable from the power supply.