Vertical Communications SCS 8324S - Manual (Page 71)

GCA70250
Attendant Manual
August, 03 Comdial 61
5. NONVERBAL MESSAGING
5.1 LCD Message Delivery
You can set standard and system supplied custom display messages
by dialing a specific code at your telephone. When another user
places a call from an LCD speakerphone, the preset LCD message
from your station will flash on the caller’s LCD. When you set a
message, the intercom number light at your telephone flashes to
indicate that the feature is active.
• To turn on a message from your telephone,
1. PRESS INTERCOM AND DIAL *02.
2. DIAL the desired code number from your message list (01–30) on the
next page, OR PRESS HOLD button to scroll through the available
messages AND DIAL # to select.
• For a “Back At” message, dial the code for time numbers and
colon from dialing codes table.
(For example, DIAL # 00 01 29 04 05 for the time 01:45).
• For a “Call” message, dial code for telephone number of your
new location.
(For example, DIAL # 09 07 08 15 02 02 00 00 for the
number 978–2200).
3. DIAL # AND PRESS SPEAKER to end message.
• To turn off the message and your intercom light,
—PRESS INTERCOM AND DIAL #02.
Note: See following page for LCD dialing codes.