Vertical Communications SCS 8324S - Manual (Page 84)

Programming
74 Comdial August, 03
6. RESPOND to any menu prompts
associated with feature (see example
for Pickup).
7. PRESS programmable button for
storage location.
8. REPEAT steps 3 through 7 for other
features, OR SELECT EXIT to end
programming.
• To clear a feature button assignment,
—REPEAT the above procedure, but SELECT CLEAR before
selecting storage location button.
6.5 Reminder Alert
You can set up to two reminder alerts to sound at your LCD speaker-
phone so that you will remember important regular events or occa-
sional events.
• To set a reminder alert at your telephone,
1. SELECT OPTIONS.
2. SELECT NEXT until the ALERT
option appears.
3. SELECT ALERT.
4. SELECT 1 OR 2 to select available
alert designation; if you have already
programmed an alert for 1, select 2 to
set a second alert condition.
5. SELECT ON (SELECT OFF to turn
off an alert that has already been set).
6. DIAL reminder time using the num-
bers on the dial pad (remember to add
a zero [0] before single digit times: 01
for one o’clock, 02 for 2 o’clock,
etc.).
7. SET AM or PM.
Pickup
GRP DIRECT EXIT
Responding to Prompts to
Program a Pickup Button
Alert 1 10:30 AM
ON OFF< EXIT
Setting an Alert
Time: 10:30 AM
SAVE PM EXIT
Setting the Alert Time