Vertical Communications SCS 8324S - Manual (Page 61)

GCA70250
Attendant Manual
August, 03 Comdial 51
7. CHOOSE a type of CFOS and SELECT the desired interactive button
(to switch the type of CFOS you wish to select, PRESS TGL):
• SELECT Itcm for intercom
calls.
• SELECT Line for prime line
calls.
• SELECT Itcm/Ln for all calls
• SELECT RNA Itcm for ring-
no-answer intercom calls
• SELECT RNA Line for ring-no-answer prime line calls
• SELECT RNA Itcm/Ln for all ring-no answer calls
8. SELECT outbound line (PRESS line
button, DIAL appropriate code, or do
nothing and let previously selected
line remain in effect). If you want to
change the destination, you must
enter something for the outbound
line.
9. SELECT forward destination (dial
number, press speed dial button, or do nothing and let previously
selected destination remain in effect).
10. PRESS SPEAKER to end (display shows CFOS).
• To deactivate CFOS, choose one of the following:
1. SELECT CFOS interactive button OR,
2. PRESS INTERCOM AND DIAL *56.
• To join an active CFOS call from the CFOS-enabled
station,
—Note flashing HOLD light indicating active CFOS call, and
press TAP. Join CFOS-forwarded party and CFOS destination
in a conference call.
CFOS Itcm/Ln
EXIT TGL NEXT
Choose CFOS Type
No CFOS Number
SAVE BKSP NEXT
Set Forward Destination