Vertical Communications SCS 8324S - Manual (Page 45)

GCA70250
Attendant Manual
August, 03 Comdial 35
3.4 Redialing
3.4.1 REDIAL - LAST-DIALED NUMBER
The system provides each station with a last number redial feature.
This feature saves 16-digits of the last outside number dialed at the
station. A newly dialed number always replaces a previously dialed
number. When you press the last number redial button, the system
will choose a line and redial the saved number.
• To redial the last-dialed number,
1. PRESS SPEAKER OR HANG UP handset to disconnect current ring-
ing or busy tone.
2. DIAL #.
3. LISTEN for ringing or busy tone over the telephone speaker.
3.4.2 REDIAL PROGRAMMING (STORING NUMBERS)
When you use last number redial, you will overwrite the temporary
system-saved number with subsequent dialing activity. However, you
can also permanently save a number that remains available until you
overwrite it by saving a different number at the same storage location.
Non-programmed buttons at multiline telephones are available for
you to dynamically save dialed numbers. To save a number, you
press any non-programmed button before hanging up after you dial
the number. To dial the saved number, you press the same button and
the system automatically dials the saved number.
• To permanently store a
number you’ve just dialed,
1. SELECT SAVE.
2. PRESS unused programmable button.
3. PRESS SPEAKER.
L123
CONF ARDL SAVE
Saving a Dialed Number