Bio-Rad PROTEAN® Plus Hinged Spacer Plates and Combs - Manual (Page 17)

Section 9
Equipment and Accessories
9.1 Model 385 and Model 395 Gradient Formers and
Accessories
Catalog
Product Description Number
Model 385 Gradient Former, includes main body assembly with 165-2000
valve stem, and tubing connection kit (stopcock, Luer taper
coupling, Y-connector, and tubing)
Model 395 Gradient Former, includes main body assembly with
165-2001
valve stem, and tubing connection kit (stopcock, Luer taper
coupling, Y-connector, and tubing)
Exponential Piston, Model 395
165-2005
Exponential Piston, Model 385 165-2006
Gradient Pouring Needles for Model 385 and 395, 2 165-2007
Tubing Connection Kit (stopcock, Luer taper coupling, tubing 165-2008
(1/8" ID, 3 ft), and Y-connector)
9.2 Additional Required Equipment (not included)
Peristaltic pump capable of delivering 10 ml/min for Model 385 Gradient Former
Peristaltic pump capable of delivering 100 ml/min for Model 395 Gradient Former
1" stir bar for Model 385 Gradient Former
2" stir bar for Model 395 Gradient Former
Magnetic stirring motor
9.3 PROTEAN II xi and Mini-PROTEAN II Vertical
Electrophoresis Cells and Accessories
Catalog
Product Description Number
PROTEAN II xi 16 cm Slab Cell* 165-1801
1.5 mm, 15 well 165-1802
1.0 mm, 15 well 165-1803
0.75 mm, 15 well 165-1804
PROTEAN II xi 20 cm Slab Cell* 165-1811
1.5 mm, 15 well 165-1812
1.0 mm, 15 well 165-1813
0.75 mm, 15 well 165-1814
All PROTEAN II xi slab cells include the central cooling core with gaskets and core caps,
lower buffer chamber, lid with power cables, 2 sets of glass plates, 4 sandwich clamps, 2
combs, an upper buffer dam, a casting stand with gaskets, a leveling bubble, PAGE starter kit,
and instructions.
* Cells marked with (*) contain all of the above except spacers and combs (order separately).
15