B&G NSPL-400 - Manual (Page 8)

| 7
About your AIS/VHF antenna splitter | NSPL-400 User Manual
Warning: This AIS/VHF antenna splitter must not be used
with Class A transceivers, Aids to Navigation transceivers or AIS
base stations.
What’s in the box?
Figure 1 shows the items included with your NSPL-400 purchase.
The following sections give a brief overview of each item. Please
ensure all items are present and if any of the items are not present
contact your dealer.
Fig. 1 What’s in the box
Accessory cables (x2)
Screws
(packet of 4)
Product manual
NSPL-400
Power and FM Radio cable
Product CD
Warranty
information
Warranty
information
Power and FM Radio cable
Screws
(packet of 4)
Accessory cables (x2)
Product manual
Figure 1 Items included with the product
• Product manual
The product manual is this document and should be read thor-
oughly prior to any attempt to install or use the NSPL-400.
• VHF radio connection cable
This cable is used to connect a VHF radio to the NSPL-400. The cable
has PL259 connectors at either end and requires a SO239 connector
on the VHF radio. If your VHF radio does not have a SO239 connec-
tor please contact your dealer for details of suitable adaptors.
• AIS transceiver connection cable
This cable is used to connect a Class-B AIS transceiver, such as the
NAIS-400 to the NSPL-400. The cable has a BNC connector at one