Troubleshooting, cleaning and disinfection, Troubleshooting, Cleaning – Amico Mira 45 User Manual
Page 10: Disinfection, Sterilization

10
Amico Lighting Solutions
Operating manual
(GB)
Page
19/40
10.4. Troubleshooting
1.
Check the on/off Switch
2.
Check the electrical supply
3.
Check the halogen lamp, change if necessary
4.
Check all terminal connections in the fixture
Also check the voltage on the connecting terminal.
10.5. Cleaning
Note: The periodical cleaning of the face-plate ensure a better light efficiency.
Use a usual glass cleaner.
Do not use concentrated disinfectant or dissolver.
For cleaning the outer surfaces, use a cloth moistened with usual cleaner.
Observe the compatibility with varnishes an plastics of the used cleaners.
10.6. Disinfection
According to instruction diluted brands can used for cleaning the outer
surfaces:
♦
Lysoformin
P
®
P
♦
Dismozon
P
®
P
♦
Hexaquart
P
®
P
plus
♦
Sagrotan
P
®
P
-Rapid disinfection cleaner
Observe all applicable local regulations.
The disinfection cleaner are applied only for
wipe disinfection. Spraying
disinfection is not allowed.
10.7. Sterilization
The grip can be sterilized for 30 minutes at 120° and 1.05 bar.
Troubleshooting
1. Check the on/off Switch
2. Check the electrical supply
3. Check the halogen lamp, change if necessary
4. Check all terminal connections in the fixture Also check the voltage on the connecting terminal.
Cleaning
Note: The periodical cleaning of the face-plate ensure a better light efficiency. Use a usual glass cleaner.
Do not use concentrated disinfectant or dissolver. For cleaning the outer surfaces, use a cloth moistened
with usual cleaner. Observe the compatibility with varnishes an plastics of the used cleaners.
Disinfection
According to instruction diluted brands can used for cleaning the outer surfaces:
• Lysoformin®
• Dismozon®
• Hexaquart® plus
• Sagrotan® – Rapid disinfection cleaner
Observe all applicable local regulations.
The disinfection cleaner are applied only for wipe disinfection. Spraying disinfection is not allowed.
Sterilization
The grip can be sterilized for 30 minutes at 120° and 1.05 bar.
Troubleshooting, Cleaning and Disinfection