Amico AHM Monitor Arms (Adjustable Height) - Manual (Page 14)

11 Amico Accessories
Monitor Shelf: 6" Drop On
WARNING: Ensure the mounting shelf is secure and locked in the vertical position to prevent the monitor from sliding
and/or falling.
NOTE: Quick installation system: On the back of the mounting plate there is a plunger that secures the plate to the
mounting adapter. Simply slide and align the adapter to the shelf and the plunger will automatically engage and lock.
1. First, install the mounting adapter to the back of the monitor (Please refer to the adapter installation manual
provided with the adapter).
2. Lift the monitor and slide the mounting adapter on to the mounting shelf. Slide the monitor down until the
mounting hole on the mounting adapter aligns with the plunger (Figure 1) . When the hole and the plunger
are perfectly aligned the plunger will automatically lock. If the plunger does not lock automatically then lock the
plunger manually by turning it. Tighten the locking screws by hand to the tightest possible position (Figure 2).
(Figure 1)
Mounting shelf
Mounting adapter
Mounting hole
(Figure 2)
Locking screws
Plunger Lock
Section 3: Installation to Monitor and Accessory