Great Plains TL350 Operator Manual - Manual (Page 30)

30 Simba TL
605-039M-ENG
2013-02-27
Troubleshooting
Fault Possible Cause Remedy
DD Light Roll blocks
regularly.
Scrapers incorrectly
adjusted
Adjust scrapers to clear dirt
from between DD Rings.
Conditions may not be
ideal for using machine.
Wait for more favourable
conditions.
Inadequate consolidation. Not enough weight on rear
roll.
Increase chassis pitch
slightly via tractor toplink.
Not enough cultivated soil
depth.
Increase working depth.
Speed too fast. Reduce speed (<12kmh).
Surface finish is uneven
and cloddy
Not enough roll pressure Reduce draft control
Running nose down Level frame
Working too shallow Increase tine depth
Levelling beam working
incorrectly
Adjust levelling beam pitch
Machine pulls to one side Tines not set evenly left to
right
Set tines evenly
Levelling discs not set
evenly left to right
Set levelling discs evenly
All ground not being moved
by tines
Working too shallow Increase tine depth
6. Faults and Remedies