Great Plains TL350 Operator Manual - Manual (Page 25)

25 Simba TL
605-039M-ENG
2013-02-27
5. Servicing and Maintenance
5.5 DD Light Roll
The spacers and rings on the DD Light Roll
are held under tension by the end plates at
the outer ends of the roll tube.
Specialist equipment is required
for the disassembly of DD Light
rollers. Please consult your
dealer under any circumstances
that require disassembly of these
rollers.
Maintenance of these rollers is limited
to yearly/end of season greasing of the
bearings and regular inspection to ensure
the assemblies are tight, and scrapers are
correctly set.
The scraper is intended to clear dirt
from blocking between adjacent DD
rings. If adjustment to the scrapers
is required ensure that the scraper
cannot contact the spacer even
under load. Regularly inspect the
spacers for signs of wear and adjust
any scrapers to ensure no contact
can be made.
5.6 Preparation for
Storage
If you need to store the machine for a longer
period, observe the following points:
 Park the machine undercover if pos-
sible.
 Protect the roll / discs against rust. If
you need to spray the implements with
oil, use light biologically degradable
oils, e.g. rape oil.
Cover any rubber sections before
using oil sprays. These sections
must not be oiled.
Remove any traces of oil with a
suitable cleaning agent.