Great Plains TL350 Operator Manual - Manual (Page 11)

11 Simba TL
605-039M-ENG
2013-02-27
1.3 Operational Safety
The machine is to be put in operation only
after instruction has been provided by an
employee of the authorised dealer or an
employee of Great Plains. The “Machine
Registration” form is to be completed and
returned to your dealer.
All protective and safety equipment, such
as removable protective equipment, must
be in place and functioning reliably before
the machine is put in use.
Check screws and bolts regularly
for tightness and retighten if ne-
cessary.
In the event of malfunctions, stop
and secure the machine immedi-
ately.
Ensure that any faults are remedied
immediately.
1.3.1 No Liability for Conse-
quential Damage
The Simba TL has been manufactured by
Great Plains with great care. However,
problems may still occur when it is used for
the intended purpose. These may include:
• Worn wearing parts.
• Damage caused by external factors.
• Incorrect driving speeds.
• Incorrect setting of the unit (incorrect
attachment, non-adherence to the Setting
instructions).
Therefore, it is crucial to always check your
machine before and during operation for
correct operation.
Compensation claims for damage
which has not occurred to the
machine is excluded. This includes
any consequential damage resul-
ting from incorrect operation.
1.2 Use for the Intended
Purpose
The Simba TL is built using the latest
technology and in accordance with the
relevant recognised safety regulations.
However, risks of injury for the operator or
third parties and impairment of the machine
or other tangible assets can arise during use.
The machine is only to be operated when
in a technically perfect condition and for the
intended purpose, taking into consideration
safety and risks and following the Operating
Instructions. In particular, faults that can
impair safety are to be remedied immediately.
Original parts and accessories from Great
Plains have been specially designed for
this machine. Spare parts and accessories
not supplied by us have not been tested
or authorised. Installation or use of non-
original Great Plains products may have
a detrimental effect on specific design
features of the machine and affect the safety
of machine operators and the machine
itself. Great Plains will accept no liability
for damage resulting from the use of non-
original parts or accessories .
The Simba TL is designed solely as a
cultivation implement. Use for any other
purpose, e.g., as a means of transport, will
be deemed to be improper use. Great Plains
will accept no liability for damage resulting
from improper use. The risk will be borne
solely by the operator.
1. Safety Data