Great Plains Hydraulic Kit - Manual

Great Plains Mfg., Inc. Parts Installation Instructions 1
2014-04-15 ©Copyright 2014 194-033M
Two-Outlet Hydraulic Kit
2- and 3-Section Drills
Used with drill models:
• 2S-2600/F/HD/HDF
• 3S-3000/F/HD/HDF
• 3S-4000/F/HD/HDF
• 3S-5000/F/HD/HDF
General Information
These instructions explain how to install the Two-Outlet
Hydraulic Kit. This combines the drill’s two Lift circuits
(Opener and Transport) into a single circuit at the hitch.
With this kit, a tractor having only two remotes can
operate a drill which would otherwise require three
circuits.
These instructions apply to:
This kit relies on some existing drill components.
This kit includes some parts not required, depending on
drill vintage, and drill options already present or also
being installed at this time.
If Markers are also to be installed, install the Two-Outlet
Hydraulic Kit first.
Notations and Conventions
“Left” and “Right” are facing in the
direction of machine travel. An
orientation rose in the line art
illustrations shows the directions of
Left, Right, Front, Back, Up, Down.
Each kit converts one drill.
Kit Kit Description
194-122A 3S TWO OUTLET TRACTOR HYD. KIT
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life
and the lives of others depend on it!
U
D
F
B
L
R
Figure 1
Location of New Valve
15485
single-digit or single-letter callouts identify
components in the currently referenced Figure
or Figures.
to two-digit callouts in the range 11 through 24
reference new parts from the list on page 9.
The descriptions match those on the cartons,
bags or item tags, as well as in your updated
Parts Manual.
to two-digit callouts in the range 51 through 62
reference affected existing parts from the table
on page 9. The descriptions match those in
your Parts Manual.
U
D
L
R
B
F
1
11 24
51 62