Great Plains 706NT Assembly Instructions - Manual (Page 2)

151-120M 4/27/2005
Great Plains Mfg., Inc.
Hydraulic Valve Kit 2
Refer to Figure 2
2. Disconnect hose (4) connecting valve (2) to
tractor at valve (2). Disconnect hose (3) con-
necting valve (2) to master cylinder at valve
(2). Keep elbow for reuse.
3. Remove two 1/4-20 x 3" bolts holding to-
gether depth adjustment bracket (5), depth
stop valve mount(1), and stroke control
valve(2). Bolts and bracket are located un-
der depth stop valve mount(1). Keep valve,
bolts, and spacer tubes for reuse.
Figure 3 23150
Refer to Figure 3
Important! To disconnect hose from valve to
master cylinder at master cylinder, it may be
necessary to remove tire.
4. Remove pin to cylinder letting cylinder fall
so it is visible. If needed, remove tire. Dis-
connect hose from valve to master cylinder
at master cylinder. Discard hose.
Figure 2 23145