Great Plains 706NT Assembly Instructions - Manual

© Copyright 2005 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
151-120M
706NT End Wheel No-Till Drill
Hydraulic Valve Kit
• 706NT End Wheel No-Till Drill
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the Hydraulic
Valve Kit. The Hydraulic Valve Kit is designed to properly
install and prevent damage to the hydraulic depth stop
and hydraulic hoses. These instructions apply to:
151-119A 706NT Hydraulic Valve Kit
4/27/2005
Before You Start
Page 10 is a detailed listing of parts included in
the Hydraulic Valve Kit. Use this list to inventory
parts received.
Tools Required
• Basic Hand Tools
Assembly Instructions
Important! Before performing update, lower drill to
ground and relieve pressure from hydraulics.
Refer to Figure 1
1. Locate depth stop valve mount and stroke control
valve on front left-hand side of drill directly behind the
gearbox.
Gearbox
Depth Stop
Valve Mount
Valve
Figure 1 23153