Great Plains TCN5313 Predelivery Manual - Manual (Page 8)

566-170Q 03/17/2014
4 TCN5107-5313 Great Plains Manufacturing, Inc.
Introduction
The TCN Turbo-Chisel has been designed with care and
built by skilled workers using quality materials. Proper
setup, maintenance, and safe operating practices will
help the customer get years of satisfactory use from the
machine.
Description of Unit
The TCN5107-5313 Turbo-Chisel is a one or three-sec-
tion “vertical” tillage tool. Working width ranges from 9 to
17 feet. The implement is designed to cut, size and bury
residue. It can work up to 11” deep, will dislodge rootballs
and leave the field smooth enough for “one pass” finish-
ing in Spring. For optimum leveling of your machine, it
should be equipped with either a Chopper Reel or Buster
Bar attachment.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major componets
5. Have all fasteners and pins shipped with machine.
TCN5107 9-Foot 1-section
TCN5309 11-Foot 3-section
TCN5311 14-Foot 3-section
TCN5313 17-Foot 3-section
566-170Q-ENG Assembly Manual
566-170Q Pre-Delivery Manual (this document)
566-170M Operator Manual
566-170P Parts Manual
Figure 1
TCN Turbo-Chisel
41977