Tire inflation chart, Hydraulic connectors and torque – Great Plains TCN5313 Predelivery Manual User Manual
Page 20
![background image](/manuals/599629/20/background.png)
16
TCN5107-5313
Great Plains Manufacturing, Inc.
566-170Q
03/17/2014
Tire Inflation Chart
Hydraulic Connectors and Torque
Refer to Figure 17 (a hypothetical fitting)
Leave any protective caps in place until immediately prior
to making a connection.
Tire Inflation Chart
Tire Warranty Information
Wheel
Tire Size
Inflation
All tires are warranted by the original manufacturer of the tire.
Tire warranty information is found in the brochures included with
your Operator’s and Parts Manuals or online at the manufac-
turer’s web sites listed below. For assistance or information, con-
tact your nearest Authorized Farm Tire Retailer.
Manufacturer
Web site
Firestone
Gleason
Titan
Galaxy
BKT
Center/
Transport
12.5L x 15” 12-Ply
379 kPa
55 psi
NPT - National Pipe Thread
Note tapered threads, no cone/flare, and no O-ring.
Apply liquid pipe sealant for hydraulic applications.
Do not use tape sealant, which can clog a filter and/or
plug an orifice.
JIC - Joint Industry Conference (SAE J514)
Note straight threads
and the 37
° cone on
“M” fittings (or 37
° flare on “F” fittings).
Use no sealants (tape or liquid) on JIC fittings.
ORB - O-Ring Boss (SAE J514)
Note straight threads
and elastomer O-Ring
.
Prior to installation, to prevent abrasion during tight-
ening, lubricate O-Ring with clean hydraulic fluid.
Use no sealants (tape or liquid) on ORB fittings.
ORB fittings that need orientation, such as the ell
depicted, also have a washer
and jam nut
(“adjustable thread port stud”). Back jam nut away
from washer. Thread fitting into receptacle until
O-Ring contacts seat. Unscrew fitting to desired
orientation. Tighten jam nut to torque specification.
2
5
4
9
8
7
5
3
Figure 17
Hydraulic Connector ID
31282
Fittings Torque Values
Dash
Size
Fitting
N-m
Ft-Lbs
-4
1
⁄
4
-18 NPT
1.5-3.0 turns past finger
tight
-5
1
⁄
2
-20 JIC
19-20
14-15
-5
1
⁄
2
-20 ORB w/jam nut
12-16
9-12
-5
1
⁄
2
-20 ORB straight
19-26
14-19
-6
5
⁄
16
-18 JIC
24-27
18-20
-6
5
⁄
16
-18 ORB w/jam nut
16-22
12-16
-6
5
⁄
16
-18 ORB straight
24-33
18-24
-8
3
⁄
4
-16 JIC
37-53
27-39
-8
3
⁄
4
-16 ORB w/jam nut
27-41
20-30
-8
3
⁄
4
-16 ORB straight
37-58
27-43
1
1
2
4
5
3
5
7
8
9