Great Plains Auxiliary Down Pressure Spring - Manual

Great Plains Mfg., Inc.
© Copyright 2002 Printed
Used with:
Update Instructions
198-962M
30’ No-Till Precision Seeding System
Auxiliary Down Pressure Spring
Assembly Option
• 3N-3010P
• 3N-3020P
General Information
These instructions explain how to install the Auxiliary
Down Pressure Spring Assembly. This kit increases the
down pressure on the contact wheel allowing for more
positive contact between the contact wheel and the gage
wheel. This modification improves the performance and
reliability of the original equipment.
These instructions apply to:
198-957K Aux. Down Pressure Spring Assy.
Manual Update
Refer to the 30’ No-Till Precision Seeding System oper-
ator’s manual for detailed information on safely operating,
adjusting, troubleshooting and maintaining the Auxiliary
Down Pressure Spring Assembly. Refer to the parts man-
ual for part identification.
196-248M Operator’s Manual
196-248P Parts Manual
Before You Start
Page 3 is a detailed listing of parts included in the Auxiliary
Down Pressure Spring Assembly option. Use this list to in-
ventory parts received.
Tools Required
• Basic hand tools
Definitions
Right-hand and left-hand as used in this manual are deter-
mined by facing the direction the machine will travel while
in use unless otherwise stated.
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
6/25/2002
20179