Great Plains 7336 DH Predelivery Manual - Manual (Page 8)

556-235Q 2014-06-25
4 Series II Disk Harrow Great Plains Manufacturing, Inc.
Introduction
The Disk Harrow has been designed with care and built
by skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The Series II Disk Harrow is a three section primary and
secondary tillage tool. Working width ranges from 23 to
36 feet. The implement is designed to cut out and bury
roots and crop residue, kill weeds and dry out the soil,
level ridges and ruts and for seedbed preparation. Vari-
ous finishing attachments are also available to further
smooth, redistribute residue, kill weeds, and break clods
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major componets
5. Have all fasteners and pins shipped with machine.
7323DH 23-Foot 3-section
7326DH 26-Foot 3-section
7329DH 29-Foot 3-section
7330DH 30-Foot 3-section
7333DH 33-Foot 3-section
7336DH 36-Foot 3-section
556-235Q Pre-Delivery Manual (this document)
556-235M Operator Manual
556-235P Parts Manual
Figure 1
3326 Disk Harrow
43391