Great Plains 3000TM - Manual

586-543M 03/06/2013
1 Fold Assist Great Plains Manufacturing, Inc.
3000TM
Fold Assist Kit
General Information
These Instructions explain how to install the fold assist kit
update. This update only applies to the 3000 Turbo Max. These instructions apply to kit number: 589-472A,
3000TM FOLD ASSIST KIT
En
MetaData: of Introduction
Tools Required
• Basic Hand Tools
• Torque Wrench
• Drill & 3/8” Drill Bit
Manual Update
Refer to the Turbo Max operator’s manual for detailed
safety and maintaining of machine and to parts manual
for part identification.
589-472A 3000TM FOLD ASSIST KIT
Assembly Instructions
Proximity Sensor
Refer to Figure 1
Note: Move machine to level ground. Wings need to be folded
up when installing the proximity sensor assembly to
prevent damage to sensor and brackets. Be sure wing
safety lock pins are installed.
1. Remove 1 lock nut from hinge pin (2nd hinge from
front).
2. Slide proximity mount bracket assembly over hinge pin
in orientation shown.
3. Re-install the 1 lock nut to secure.
4. Tighten lock nut snug but do not torque.
5. Repeat same procedure for right side.
586-288M Operator Manual
586-288P Parts Manual
Part Number Description Qty.
586-543M
MANUAL 3000 TMAX
FOLD ASSIST
1
589-216D EATON SENSOR MOUNT 2
810-300C
PRESSURE GAUGE 3000
PSI
1
810-849C
FIXED BYPASS DOWN
PRESS VALVE
1
811-063C EL 3/4MJIC 3/4MORB 2
811-677C AD 9/16MORB 1/4FNPT 1
833-623C PROXIMITY SENSOR 2
848-972C
DECAL OPERATOR
INSTRUCT TM
1
848-995C
PRESSURE GAUGE
DECAL
1
891-327C FOLD ASSIST HARNESS 1
891-387C
LIGHT HARNESS - EXT
LEAD/VALVE
1
Part Number Description Qty.
FigureSpacer:
FigureSpacer:
U
D
F
B
L
R
Null4:
Figure 1
Proximity Sensor
43014
1
3
2
3
1 2
3
2
1
1