Great Plains ADC2350B Assembly Instructions - Manual (Page 11)

Great Plains Mfg., Inc.
Installation Instructions 11
03/05/2009 166-255M
The following existing parts are involved in the kit instal-
lation. The Disposition column indicates whether the part
is left in place, moved or not re-used. The part call-out numbers in the list matches all Figures
in the installation instructions. The descriptions match
those in your air cart Parts manual.
Abbreviations
Callout Part No. Part Description Part Disposition
166-071H AUGER PIVOT BRACKET WELDMENT Removed. Not re-used.
166-169H AUGER PIVOT ARM - OUTSIDE Partially dismantled. Left in place.
166-179H AUGER FRNT CARRIER PULL BEHIND Removed. Not re-used.
166-180H AUGER REAR CARRIER PULL BEHIND Removed. Not re-used.
802-034C HHCS 1/2-13X1 1/4 GR5 Removed. Not re-used.
802-045C HHCS 1/2-13X5 GR5 Removed. Not re-used.
802-469C HHCS 3/4-10X8 GR5 PLT Removed. Not re-used.
803-019C NUT LOCK 1/2-13 PLT Removed. Not re-used.
803-020C NUT HEX 1/2-13 PLT Removed. Not re-used.
803-025C NUT HEX 3/4-10 PLT NYLOCK Removed. Not re-used.
804-008C WASHER FLAT 3/4 HARD USS Removed. Not re-used.
804-015C WASHER LOCK SPRING 1/2 PLT Removed. Not re-used.
807-016C SPRING RESET HOE Partially dismantled. Left in place.
ASTM American Society for Testing and Materials PLT Plated
FTHD Full-Threaded UPD Update
GR5 Grade 5 USS United States Standard (heavy duty)
HEX Hexagonal X by
HHCS Hex Head Cap Screw (Bolt)
51
52
53
54
55
56
57
58
59
60
61
62
63