Great Plains 2335SC Predelivery Manual - Manual (Page 8)

540-072Q 10/08/2013
4 2112-2335SC Great Plains Manufacturing, Inc.
Introduction
The Series I Seedbed Conditioner has been designed
with care and built by skilled workers using quality materi-
als. Proper setup, maintenance, and safe operating prac-
tices will help the customer get years of satisfactory use
from the machine.
Description of Unit
The Series I 2112-2335SC Seedbed Conditioner is a
five-section soil firming and conditioning tool. Working
width ranges from 12 to 35 feet. The implement is
designed to pull behind a host machine or on its own to
create a firm seedbed for optimum seed germination
while also leveling ridges and breaking clods.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major components
5. Have all fasteners and pins shipped with machine.
2112SC 12-Foot 1-section
2115SC 15-Foot 1-section
2317SC 17-Foot 3-section
2320SC 20-Foot 3-section
2322SC 22-Foot 3-section
2325SC 25-Foot 3-section
2327SC 27-Foot 3-section
2330SC 30-Foot 3-section
2332SC 32-Foot 3-section
2335SC 35-Foot 3-section
540-072Q Pre-Delivery Manual (this document)
540-072M Operator Manual
540-072P Parts Manual
Figure 1
2112SC Seedbed Conditioner
42290