Great Plains 3N-4020 Assembly Instructions - Manual (Page 4)

113-777M 2/28/2006
Great Plains Mfg., Inc.
Flat Fold Marker Option 4
Refer to Figure 6
9. Attach transport brace (27) to first marker
section (1) with 1/2" x 3 1/4" bolts (28) 1/2"
washers (29) and 1/2" nuts (30).
10. Assemble lift arms (31) and (36) to the trans-
port brace and second marker section as
shown. Fasten with 1/2" x 3 1/4" bolts (28) and
1/2" lock nuts (32).
NOTE:Make sure the curved end of arm (31) is
facing down as shown.
IMPORTANT: Do not overtighten. The lift arms
must be able to swivel in their mounts.
NOTE: Cylinder removed to
show details.
21888
Figure 6
Transport Brace and Marker Chain Assembly