Great Plains 3S-4000F Predelivery Manual - Manual (Page 4)

3S-4000
195-242Q 9/12/2009
2
Avoid High Pressure Fluids
Escaping fluid under pressure can penetrate the
skin, causing serious injury.
▲ Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.
▲ Use a piece of paper or cardboard, NOT
BODY PARTS, to check for suspected leaks.
▲ Wear protective gloves and safety glasses or
goggles when working with hydraulic systems.
▲ If an accident occurs, see a doctor immedi-
ately. Any fluid injected into the skin must be
surgically removed within a few hours or gan-
grene may result.
Practice Safety
▲ Understand procedure before doing work. Use
proper tools and equipment.
▲ Work in a clean, dry area.
▲ Inspect all parts. Make sure parts are in good
condition and installed properly.
▲ Remove all tools and unused parts from drill
before operation.
Prepare for Emergencies
▲ Be prepared if a fire starts.
▲ Keep a first aid kit and fire extinguisher handy.
▲ Keep emergency numbers for doctor, ambu-
lance, hospital and fire department near
phone.
911