Great Plains 3P300 Operator Manual - Manual (Page 47)

Great Plains Manufacturing, Inc. Troubleshooting 43
09/14/2009 500-103M-A
Pressure
cannot
decrease Pump or elec-
tric ball valve Tank agitation restricted Check that the agitator valve is open and that
the liquid is being agitated
Liquid will
not induct Chemical
Inductor Make sure the valve below the
inductor tank is open
Make sure the pump is in opera-
tion and has prime
Make sure the venturi bypass
valve is open
Inductor
overflow Chemical
Inductor Close valve below inductor tank
until pump is running, has pres-
sure and venturi valve is open
Problem
Problem
Area
Specific Checks Solutions