Great Plains 3N-3020P Operator Manual - Manual (Page 31)

4/23/2010 196-248M
29 Operating Instructions
Parking
For information on long-term storage, refer to
“Storage”, page 63.
This drill has negative tongue weight when unfolded.
Unhooking the drill from the tractor when the drill is
unfolded could cause the drill tongue to raise suddenly,
hitting or crushing bystanders. To avoid serious injury
or death, never unhook the drill from the tractor when
the drill is unfolded.
1. Fold the drill. Refer to “Folding the Drill,” page
24.
Refer to Figure 11
2. Park the drill on a level, solid area.
3. Securely block the tires to prevent rolling.
4. Remove the jack from its storage stob. Pin the
jack in parking position. If the ground is soft,
place a board or plate under the jack.
5. Extend the jack until tongue weight is off the
drawbar.
6. Unplug the hydraulic lines from the tractor. Do
not allow hose ends to rest on the ground.
7. Unplug the drill light cable from the tractor. If
outfitted with an optional monitor, unplug
monitor harness from console.
8. Remove hitch pin and safety chain from trac-
tor drawbar.
19101
Figure 11