Great Plains 3N-3020P Operator Manual - Manual (Page 17)

4/23/2010 196-248M
15 Introduction
separates multiple seeds from the seed pool and
distributes them at a constant flow rate. The seed
rates are designated as pounds per acre.
Sliding seed tubes - telescoping tubes which con-
nect the seed box and seed meters.
Seed meter - the component which separates the
seeds for distribution.
Seed meter wheel - a changeable wheel inside
the seed meter with small pockets for separating
seeds.
Seed wheel pockets - indentations on the seed
meter wheel which collect seeds for distribution to
the opener seed tube.
Right-hand and left-hand as used in this manual
are determined by facing the direction the ma-
chine will travel while in use unless otherwise
stated.
A crucial point of information related to the preced-
ing topic. For safe and correct operation, read and
follow the directions provided before continuing.
NOTE: Useful information related to the pre-
ceding topic.
.
19939
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Your machine’s parts were specially designed and should
only be replaced with Great Plains parts. Always use the
serial and model number when ordering parts from your
Great Plains dealer. The serial-number plate is located on
the wing frame tube on the left end of the drill as shown.
Record your drill model and serial number here for quick
reference:
Model Number:__________________________
Serial Number: ___________________________
Your Great Plains dealer wants you to be satisfied with your
new machine. If you do not understand any part of this
manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service manag-
er. Make sure they are aware of any problems so they
can assist you.
2. If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060