Great Plains 3N-3020P Operator Manual - Manual (Page 58)

3N-3010P and 3N-3020P
196-248M 4/23/2010
56
Cleaning Out Meters
NOTE: Shut off sliding seed tubes before at-
tempting to clean out seed meters.
For seed meter clean out:
Refer to Figure 49
1. Position tarp or buckets under the opener(s)
whose meter(s) you will be cleaning out.
2. Remove retaining clip and pull pin.
Refer to Figure 50
1. Pull up on meter clean-out door to open.
2. When meter is empty, push meter clean out
door back to its original position to close.
NOTE: You may need to shake the clean out
door a little before closing to make sure all
seeds fall out.
3. Replace pin and retaining clip.
Clean out door
19192
19190
Figure 49
Figure 50