Great Plains PH-20 Predelivery Manual - Manual (Page 9)

7
Section 1 Assembly
2/20/2006 PFH-15 and PFH-20 Precision Fertilizer Hitch 148-365Q
Great Plains Mfg., Inc.
Assemble Fertilizer Unit
1. Complete steps 1 through 4 on page 6, then refer to
Figure 1-2 and complete the following steps.
2. Using mechanical assistance, position tanks on hitch
frame (1) as shown.
3. Bolt tank mounts onto hitch frame on outside ends (2)
of hitch using 3/4-by-3 3/4-inch bolts, flat washers,
lock washers (3) and nuts.
4. Bolt tank mount onto hitch frame from front using 3/4-
by-1 1/4-inch bolts (4), lock washers and nuts.
5. On each tank, use three 5/8-inch u-bolts (5) to bolt
tanks to rear frame tube (6).
Figure 1-2
Install Tanks, Fertilizer Unit
18055