Important safety information – Great Plains PH-20 Predelivery Manual User Manual
Page 3
1
Important Safety Information
2/20/2006
PFH-15 and PFH-20 Precision Fertilizer Hitch 148-365Q
Great Plains Mfg., Inc.
Important Safety Information
Keep Riders
Off Machinery
Riders obstruct the operator’s view.
Riders could be struck by foreign
objects or thrown from machine.
▲ Never allow riders on implement.
▲ Never allow children to operate
equipment.
Be Aware of Signal Words
Signal words designate a degree or
level of hazard seriousness. The sig-
nal words are:
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury. This
signal word is limited to the most
extreme
situations,
typically
for
machine components that, for func-
tional purposes, cannot be guarded.
Indicates a potentially hazardous sit-
uation which, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may
also be used to alert against unsafe
practices.
Indicates a potentially hazardous sit-
uation which, if not avoided, may
result in minor or moderate injury. It
may also be used to alert against
unsafe practices.
For Your Protection
▲ Before assembling or operating
the implement, read thoroughly
and understand the Safety Decals
and
“Operating
Instructions”
sections in the operator’s manual.
Read all instructions noted on
decals.
!
CAUTION
Shutdown and Storage
▲ Lower machine to ground, put
tractor in park, turn off engine,
and remove key.
▲ Detach and store implement in an
area where children normally do
not play. Secure implement with
blocks and supports.
OFF
!
WARNING
!
DANGER
!
Look for Safety Symbol
The SAFETY ALERT SYMBOL indi-
cates there is a potential hazard to
personal safety involved and extra
safety precaution must be taken.
When you see this symbol, be alert
and carefully read the message that
follows it. In addition to design and
configuration of equipment, hazard
control and accident prevention are
dependent upon the awareness, con-
cern, prudence and proper training of
personnel involved in the operation,
transport, maintenance and storage
of equipment.